Complicaciones perianales causadas por agentes modeladores inyectados en glúteos / Perianal complications caused by gluteal injection of modeling agents

En este reporte presentamos tres pacientes en quienes ocurrieron condiciones inflamatorias perianales tardías, luego de la administración de sustancias modeladoras no identificadas en los glúteos. El diagnóstico inicial y supuesto no fue correcto, ya que no se investigó durante la evaluación preliminar el antecedente de la administración de elementos modeladores. Recomendamos que los pacientes con patologías inflamatorias del ano, sobre todo aquellos cuyo curso es extraño, se les pregunte acerca de la administración de agentes modeladores en los glúteos. Esta práctica puede contribuir a la eficacia del diagnóstico de manifestaciones perianales caracterizadas por flogosis, que se presentan de forma inusual. (AU)

In this report we present three patients in which late perianal inflammatory conditions occurred after administration of unidentified modeling agents to the buttocks. The initial diagnosis was not correct because of the administration of modeling agents was not investigated during the initial eval-uation. We recommend inquiring patients with inflammatory pathologies of the anus, especially those whose course is unusual, about the adminis-tration of modeling agents to the buttocks. This approach can contribute to the efficiency of the diagnosis of perianal complaints characterized by inflammation, but rare in its appearance. (AU)

Eletrofiação aplicada a cicatrização de feridas: revisão de literatura / Electrospinning applied to wound healing: literature review / Electroalambre aplicado a la cicatrización de heridas: revisión de la literatura

feridas correspondem a interrupção da continuidade da pele, com a perda de uma ou mais camadas do tecido cutâneo. Curativos tradicionalmente aplicados em feridas cutâneas buscam principalmente fornecer uma barreira de proteção e permitir o desenvolvimento dos eventos celulares e bioquímicos que compreendem a cicatrização. Objetivou-se com este estudo apresentar sob a forma de revisão de literatura narrativa os principais eventos relacionados ao processo de reparo tecidual da pele, bem como abordar a aplicabilidade da técnica de eletrofiação no desenvolvimento de curativos funcionais biocompatíveis. Foram selecionados artigos voltados à caracterização dos eventos chave ocorridos a nível tecidual durante a cicatrização e, na sequência, buscou-se artigos voltados à produção, caracterização e aplicação de filmes nanoeletrofiados com ênfase na utilização de biopolímeros e substâncias bioativas. Observou-se que a maioria dos trabalhos recentes, voltados a pesquisa de base, descrevem a resposta vascular como o principal evento do processo cicatricial, sendo responsável pelas etapas que se desenrolam a seguir, que compreendem as fases inflamatória, proliferativa e de remodelamento, classicamente já descritas. Os curativos funcionais baseados em polímeros eletrofiados apresentam resultados superiores quanto testados in vitro e in vivo. As características morfoestruturais mimetizam a matriz extracelular e podem atuar em tecidos alvo como dispositivos de entrega de substâncias. Conclui-se que a atualização e reorganização de conceitos relativos à cicatrização podem contribuir no desenvolvimento de inovações, como os curativos produzidos por eletrofiação. Embora promissora, as desvantagens da técnica encontram-se principalmente no processo de obtenção e disponibilidade, que limitam a aplicação clínica em escala comercial.

Wounds correspond to the interruption of skin continuity, with the loss of one or more layers of skin tissue. Dressings traditionally applied to cutaneous wounds mainly seek to provide a protective barrier and allow the development of cellular and biochemical events that comprise healing. The objective of this study was to present, in the form of a narrative literature review, the main events related to the skin tissue repair process, as well as to address the applicability of the electrospinning technique in the development of biocompatible functional dressings. Articles focused on the characterization of the key events that occurred at the tissue level during healing were selected and, subsequently, articles focused on the production, characterization and application of nanoelectrospun films with emphasis on the use of biopolymers and bioactive substances were sought. It was observed that most recent works, focused on basic research, describe the vascular response as the main event of the healing process, being responsible for the steps that follow, which include the inflammatory, proliferative and remodeling phases, classically already described. Functional dressings based on electrospun polymers show superior results when tested in vitro and in vivo. The morphostructural features mimic the extracellular matrix and can act in target tissues as substance delivery devices. It is concluded that the updating and reorganization of concepts related to healing can contribute to the development of innovations, such as dressings produced by electrospinning. Although promising, the technique's disadvantages lie mainly in the process of obtaining and availability, which limit clinical application on a commercial scale.

Las heridas corresponden a la interrupción de la continuidad de la piel, con la pérdida de una o más capas de tejido cutáneo. Los apósitos aplicados tradicionalmente a las heridas cutáneas buscan principalmente proporcionar una barrera protectora y permitir el desarrollo de los eventos celulares y bioquímicos que comprenden la curación. El objetivo de este estudio fue presentar en forma de revisión bibliográfica narrativa los principales acontecimientos relacionados con el proceso de reparación tisular de la piel, así como abordar la aplicabilidad de la técnica de electrodeposición en el desarrollo de apósitos funcionales biocompatibles. Se seleccionaron artículos dirigidos a la caracterización de los eventos chave ocurridos a nivel técnico durante la cicatrización y, a continuación, se buscaron artículos dirigidos a la producción, caracterización y aplicación de películas nanoelectrofíricas con énfasis en el uso de biopolímeros y sustancias bioativas. Se observa que la mayoría de los trabajos recientes, realizados en la investigación de base, describen la respuesta vascular como el principal evento del proceso cicatricial, siendo responsable de las etapas que se desarrollan a continuación, que comprenden las fases inflamatoria, proliferativa y de remodelación, clásicamente descritas. Los apósitos funcionales basados en polímeros electro-tejidos presentan resultados superiores cuando se prueban in vitro e in vivo. Las características morfoestruturales mimetizan la matriz extracelular y pueden actuar en tejidos alvos como dispositivos de entrega de sustancias. Se concluye que la actualización y la reorganización de los conceptos relativos a la cicatrización pueden contribuir al desarrollo de innovaciones, como las curativas producidas por la electrofagia. Aunque es prometedora, las desventajas de la técnica radican principalmente en el proceso de obtención y la disponibilidad, que limitan la aplicación clínica a escala comercial.

Uso de quitina e quitosana como adsorventes de amônia de efluentes aquícolas: revisão de literatura / Use of chitin and quitosan as adsorvents of ammonia of aquaculture effluents: a literature review / Uso de quitina y quitosana como adsorbentes de amonia de efluentes acuícolas: revisión de literatura

Os resíduos provenientes da aquicultura são derivados da ração e da excreção dos peixes e podem estar sedimentados, suspensos ou dissolvidos, ocasionando elevados valores de DBO, DQO, nitrogênio e fósforo. A produção de camarões no Brasil tem gerado elevadas quantidades de resíduos sólidos, tendo em vista que os exoesqueletos dos camarões correspondem a cerca de 40% do seu peso total, resultando num forte impacto ambiental. Diversas pesquisas envolvendo a quitina estão sendo desenvolvidas na área de tratamento de água, devido principalmente a sua capacidade de formar filme, sendo utilizada em sistemas filtrantes. Este polissacarídeo também pode ser utilizado como agente floculante no tratamento de efluentes, como adsorvente na clarificação de óleos, e principalmente na produção de quitosana. Atualmente a quitosana possui aplicações multidimensionais, desde áreas como a nutrição humana, biotecnologia, ciência dos materiais, indústria farmacêutica, agricultura, terapia genética e proteção ambiental. A quitosana é muito eficiente na remoção de poluentes em diferentes concentrações. Apresenta alta capacidade e grande velocidade de adsorção, boa eficiência e seletividade tanto em soluções que possuem altas ou baixas concentrações. O uso da biotecnologia, através do processo de adsorção utilizando adsorventes naturais e baratos, como a quitina e quitosana, minimiza os impactos ambientais da aquicultura tanto em relação aos provocados pelo lançamento de efluentes no meio ambiente quanto aos causados pelo descarte inadequado dos resíduos do processamento de camarões.(AU)

Aquaculture residues are derived from fish feed and excretion and may be sedimented, suspended or dissolved, resulting in high BOD, COD, nitrogen and phosphorus values. Shrimp production in Brazil has generated high amounts of solid waste, since shrimp exoskeletons account for about 40% of their total weight, resulting in a strong environmental impact. Several researches involving chitin are being developed in the area of water treatment, mainly due to its ability to form film, being used in filter systems. This polysaccharide can also be used as a flocculating agent in the treatment of effluents, as an adsorbent in the clarification of oils, and especially in the production of chitosan. Currently, chitosan has multidimensional applications, from areas such as human nutrition, biotechnology, materials science, pharmaceutical industry, agriculture, gene therapy and environmental protection. Chitosan is very efficient in the removal of pollutants at different concentrations. It presents high capacity and high adsorption velocity, good efficiency and selectivity both in solutions that have high or low concentrations. The use of biotechnology, through the adsorption process using natural and cheap adsorbents such as chitin and chitosan, minimizes the environmental impacts of aquaculture both in relation to those caused by the release of effluents into the environment and those caused by the inappropriate disposal of processing residues of shrimps.(AU)

Los residuos procedentes de la acuicultura se derivan de la ración y de la excreción de los peces y pueden estar sedimentados, suspendidos o disueltos, ocasionando elevados valores de DBO, DQO, nitrógeno y fósforo. La producción de camarones en Brasil ha generado grandes cantidades de residuos sólidos, teniendo en cuenta que los exoesqueletos de los camarones corresponden a cerca del 40% de su peso total, resultando en un fuerte impacto ambiental. Varias investigaciones involucrando la quitina se están desarrollando en el área de tratamiento de agua, debido principalmente a su capacidad de formar película, siendo utilizada en sistemas filtrantes. Este polisacárido también puede ser utilizado como agente floculante en el tratamiento de efluentes, como adsorbente en la clarificación de aceites, y principalmente en la producción de quitosana. Actualmente la quitosana posee aplicaciones multidimensionales, desde áreas como la nutrición humana, biotecnología, ciencia de los materiales, industria farmacéutica, agricultura, terapia genética y protección ambiental. La quitosana es muy eficiente en la eliminación de contaminantes en diferentes concentraciones. Presenta alta capacidad y gran velocidad de adsorción, buena eficiencia y selectividad tanto en soluciones que poseen altas o bajas concentraciones. El uso de la biotecnología, a través del proceso de adsorción utilizando adsorbentes naturales y baratos, como la quitina y quitosana, minimiza los impactos ambientales de la acuicultura tanto en relación a los provocados por el lanzamiento de efluentes en el medio ambiente en cuanto a los causados por el descarte inadecuado de los residuos del procesamiento de camarones.(AU)

Reacción granulomatosa de tipo sarcoideo secundaria a biopolímeros: reporte de caso y revisión de la literatura / Biopolymer sarcoid-like foreign-body granulomas: Case report and literature review

La alogenosis iatrogénica es la enfermedad causada por la aplicación de biopolímeros con fines estéticos. Sus manifestaciones clínicas pueden presentarse entre las seis horas y los 30 años posteriores a la aplicación, con síntomas locales o sistémicos. El principal rasgo de la histopatología es la presencia de granulomas por cuerpo extraño con reacción de tipo sarcoideo, la cual es difícil de Interpretar por su asociación con la sarcoidosis. Se reporta aquí el caso de una paciente con lesiones granulomatosas de tipo sarcoideo por reacción a cuerpo extraño, secundaria a la aplicación de múltiples sustancias desconocidas en cara y glúteos.

Iatrogenic allogenosis is a disease caused by the injection of biopolymers with esthetic purposes. Clinical manifestations can occur between six hours and 30 years after the procedure with local and/or systemic symptoms. The pathological findings are characterized by the presence of foreign body granulomas with a sarcoid-like reaction. Its Interpretation Is difficult given Its association with sarcoidosis. We report the clinical case of a female patient with granulomatous lesions In reaction to a foreign body secondary to the multiple application of unknown substances on the face and buttocks.

A biocomplex to repair experimental critical size defects associated with photobiomodulation therapy

The association of scaffolds to repair extensive bone defects can contribute to their evolution and morphophysiological recomposition. The incorporation of particulate biomaterials into three-dimensional fibrin bioproducts together with photobiomodulation therapy (PBM) has potential and can improve regenerative medicine procedures. The objective of this experiment was to evaluate the effects of PBM therapy on critical size defects filled with xenogenic bone substitute associated with fibrin biopolymer. Methods: A critical defect of 8 mm was performed in 36 Wistar male adult rats that were divided into four groups. Groups BC and BC-PBM were defined as controls with defects filled by a clot (without or with PBM, respectively) and groups XS and XS-PBM that comprised those filled with biocomplex Bio-OssTM in association with fibrin biopolymer. PBM was applied immediately after the surgery and three times a week every other day, with the parameters: wavelength of 830 nm, energy density 6.2 J/cm2, output power 30 mW, beam area of 0.116 cm2, irradiance 0.258,62 W/cm2, energy/point 0.72 J, total energy 2.88 J. Fourteen and 42 days after the surgery, animals were euthanatized and subjected to microtomography, qualitative and quantitative histological analysis. Results: The BC-PBM and XS-PBM groups had a similar evolution in the tissue repair process, with a higher density of the volume of new formed bone in relation to the groups without PBM (p = 0.04086; p = 0.07093, respectively). Intense vascular proliferation and bone deposition around the biomaterial particles were observed in the animals of the groups in which biocomplex was applied (XS and XS-PBM). Conclusion: PBM therapy allowed an improvement in the formation of new bone, with a more organized deposition of collagen fibers in the defect area. Biocomplex favored the insertion and permanence of the particulate material in bone defects, creating a favorable microenvironment for accelerate repair process.(AU)

Preparação e caracterização de nanocarreadores de beta-lactose à base de pectina e lisozima / Preparation and characterization of beta-lactose nanocarriers based on pectin and lysozyme

O objetivo deste trabalho foi preparar e caracterizar nanocarreadores via auto-organização a partir da pectina de citros e lisozima para o encapsulamento da ß-lactose. Foram estudadas três condições de interação entre os biopolímeros variando a razão molar pectina/lisozima (3:1, 2:1, 1:1, 1:2 e 1:3), o pH e o tempo de aquecimento. A confirmação da interação foi determinada por espectroscopia no infravermelho por transformada de Fourier (FTIR) e por calorimetria de varredura diferencial (DSC). Os espectros de infravermelho evidenciaram que ligações de hidrogênio foram as principais forças envolvidas na formação dos nanocarreadores e sugeriram a ausência de ß-lactose livre na superfície das nanopartículas. Os termogramas evidenciaram que as nanopartículas formadas na presença de ß-lactose têm maior estabilidade térmica do que as nanopartículas sem ß-lactose. Para ambas as formulações estudadas, na presença e na ausência de ß-lactose, a formação das nanopartículas ocorreu entre os valores de pKa e ponto isoelétrico (pI) da pectina e lisozima, respectivamente, sendo a melhor razão de interação pectina/lisozima 1:2, em pH 10, a 80 ºC por 30 min. As nanopartículas foram formadas via auto-organização e todos as partículas apresentaram distribuição de tamanho homogênea, formato esférico, diâmetro inferior a 100 nm e carga superficial negativa. A morfologia e o tamanho das partículas pouco alteraram com a incorporação da -lactose. A eficiência de encapsulação (EE) da ß-lactose foi superior a 96% para as concentrações estudadas. Ensaios preliminares in vitro, em células epiteliais de câncer de cólon (HCT-116), evidenciaram que as nanopartículas formadas são capazes de adentrar no meio intracelular, possivelmente, por via endocitose

This work aimed to prepare and characterize nanocarriers via self-assembly using citrus pectin and lysozyme for ß-lactose encapsulation. Three interaction conditions between the biopolymers were studied, varying the pectin/lysozyme molar ratio (3:1, 2:1, 1:1, 1:2 and 1:3), pH and heating time. Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) determined the interaction's confirmation. The infrared spectra showed that hydrogen bonds were the main forces involved in the formation of nanocarriers and suggested the absence of free ß-lactose on the surface of the nanoparticles. The thermograms showed that nanoparticles formed in the presence of ß-lactose have greater thermal stability than nanoparticles without ß-lactose. For both formulations studied, in the presence and absence of lactose, the formation of nanoparticles occurred between the pKa and isoelectric point (pI) values of pectin and lysozyme, respectively, with the best pectin/lysozyme interaction molar ratio 1:2, at pH 10, at 80 °C for 30 min. Nanoparticles were formed via self-assembly, and all particles presented homogeneous size distribution, spherical shape, diameter less than 100 nm, and negative surface charge. The morphology and size of the particles changed little with the incorporation of ß-lactose. The encapsulation efficiency (EE) of ß-lactose was higher than 96% for the concentrations studied. Preliminary in vitro assays in colon cancer epithelial cells (HCT-116) showed that the nanoparticles formed are capable of entering the intracellular medium, possibly via endocytosis

Manejo quirúrgico de biopolímeros en punta nasal: reporte de caso y revisión de la literatura / Surgical Management of Biopolymers in Nasal Tip: Case Report and Literature Review

Introducción: los rellenos faciales han sido ampliamente utilizados a nivel mundial. Existen rellenos temporales, semipermanentes y permanentes. En cuanto a los rellenos permanentes, la silicona es la más utilizada y está aprobada por la agencia gubernamental de los Estados Unidos, la Administración de Alimentos y Medicamentos (FDA), en dos presentaciones para el desprendimiento de la retina. En 1997 se autorizó el uso off-label de Adatosil y Silicon 100, ambas prescritas durante la relación médico-paciente. Se han descrito múltiples eventos adversos secundarios a la inyección de silicona como relleno facial, principalmente síntomas inflamatorios, reacción a cuerpo extraño, sepsis y migración del producto, que por lo general se presentan por una aplicación inapropiada por personal sin entrenamiento. Caso clínico: se presenta el caso de un paciente masculino en la quinta década de la vida, a quien le aplicaron silicona en aceite a nivel de la punta nasal; posteriormente, presenta dermatopatía secundaria sin respuesta al manejo médico, por lo cual requiere manejo quirúrgico para el retiro del material alogénico y reconstrucción nasal secundaria. Se dan recomendaciones para el manejo quirúrgico de estos pacientes.

Introduction: Injectable facial fillers have been widely used worldwide. There are temporary, semipermanent, and permanent fillers. Regarding permanent fillers silicone is the most widely used, approved by the Food and Drug Administration (FDA) in two presentations Adatosil and Silicon 100 for retinal detachment. In 1997 the FDA allows for the off-label use prescribed within the doctor-patient relationship. There have been reported multiple adverse events, mainly inflammatory symptoms, foreign body reactions, sepsis, and product migration generally occurring by inappropriate application by untrained personnel. Case report: We present the case of a male patient in the fifth decade of life who underwent the application of silicone oil at the level of the nasal tip, and later presented secondary dermatopathy without response to medical management, which requires surgical management to remove the allogeneic material and secondary nasal reconstruction

Migration of liquid silicone, an emerging contraindication of neuraxial anesthesia / Migración de silicona líquida, una contraindicación emergente de la anestesia neuroaxial

Abstract The illegal use of liquid silicone products or biopolymers in gluteal augmentation procedures is giving rise to multiple complications, with a significant negative health impact, both in the short and long-term. The migration of polymers to the sacral and lumbar region represents a major limitation to conducting neuraxial anesthesia procedures. This silicon migration is unpredictable through the superficial tissue as is widely described in the literature. Caudal, spinal and epidural anesthesia may cross the silicone in the fascia and contaminate the neural axis with substances that are highly capable of causing inflammation, edema and tissue necrosis. In order to improve the safety of neuraxial anesthetic procedures and avoid the potential risk of dissemination and contamination of the neural axis, this complication must be ruled out, or be considered an emerging contraindication for these anesthetic procedures.

Resumen La aplicación ilegal de productos como silicona líquida o biopolímeros en procedimientos de aumento de glúteos está generando múltiples complicaciones con gran impacto negativo para la salud tanto a corto como a largo plazo. La migración de polímeros a la región sacra y lumbar representa una importante limitación para la realización de procedimientos de anestesia neuroaxial. Esta migración de silicona es impredecible a través del tejido superficial, la cual está ampliamente descrita en la literatura. Los procedimientos anestésicos caudal, espinal y epidural podrían atravesar los silicomas en la fascia del tejido y contaminar el neuroeje con sustancias con alta capacidad de generar inflamación, edema y necrosis de tejidos. Con el fin de aumentar la seguridad de los procedimientos anestésicos neuroaxiales y evitar el riesgo potencial de dispersión y contaminación del neuroeje, es necesario descartar esta complicación o considerar una contraindicación emergente en estos procedimientos anestésicos.

Actividad antioxidante y quelante de sistemas hidrocoloides mixtos formados por hidrolizados proteicos de Phaseolus vulgaris endurecido y goma modificada de flamboyán (Delonix regia) / Antioxidant and metal-chelating activities of mixed hydrocolloid systems formed by hard-to-cook Phaseolus vulgaris protein hydrolysates and flamboyant (Delonix regia) modified gum

Las proteínas y polisacáridos con frecuencia son utilizados simultáneamente en la industria de alimentos. Las interacciones entre ambos biopolímeros juegan un papel importante en la estructura y estabilidad de muchos alimentos procesados ya que pueden resultar en un sistema con propiedades bioactivas diferentes como ocurre en el caso de las funcionales. Objetivo. Evaluar los cambios en la capacidad antioxidante de un sistema hidrocoloide mixto formado por un hidrolizado enzimático proteico de frijol endurecido (P. vulgaris) y goma modificada de flamboyán (Delonix regia) (SHM). Materiales y métodos. El estudio se hizo entre febrero-octubre, 2014, en Mérida, México. Se modificó enzimáticamente el concentrado proteico de P. vulgaris con Pepsina-Pancreatina® y la goma extraída del flamboyán mediante carboximetilación, preparando dispersiones al 1% de cada uno de los biopolímeros, determinado la fluorescencia intrínseca de Trp (FIT) como indicador de la interacción entre ambos biopolímeros y la actividad antioxidante y quelante del sistema resultante. Resultados. Se obtuvo un hidrolizado proteico extensivo con 28,8% de grado de hidrólisis y una goma de flamboyán con grado de sustitución de 0,91. La mayor interacción entre ambos biopolímeros, se obtuvo empleando una relación 5:1 del SHM a pH 4 de acuerdo con el valor de FIT. Conclusiones. Los sistemas hidrocoloides mixtos preparados con hidrolizado extensivo de las proteínas Phaseolus vulgaris y goma modificada de flamboyán presentaron un incremento en la actividad antioxidante, respecto del hidrolizado dependiendo del mecanismo de oxidación, así como de las condiciones de pH en que se encuentra el sistema y la interacción entre ambos componentes(AU)

Proteins and polysaccharides are frequently used simultaneously in the food industry. The interactions between both biopolymers play an important role in the structure and stability of many processed foods since they can result in a system with different bioactive properties as in the case of functional ones. Objective. Evaluate the changes in the antioxidant capacity of mixed hydrocolloid system formed by a hard to cook bean (P. vulgaris) protein enzymatic hydrolyzate and modified flamboyant gum (Delonix regia) (SHM). Materials and methods. The study was conducted from February to October 2014 in Merida, Mexico. For this, the protein concentrate of P. vulgaris was treated with Pepsin-Pancreatin® and the gum extracted from the flamboyant were modified enzymatically by carboxymethylation, preparing 1% dispersions of each of the biopolymers, determining the intrinsic Trp fluorescence (FIT) as an indicator of the interaction between both biopolymers and the antioxidant and chelating activity of the resulting system. Results. The main results indicated that an extensive protein hydrolyzate with 28.8% degree of hydrolysis and a flamboyant gum with a substitution degree of 0.91 were obtained. The greatest interaction between both biopolymers was obtained using a 5:1 ratio of SHM to pH 4 according to the FIT value. Conclusions. The mixed hydrocolloid systems prepared with extensive hydrolyzate of the hard to cook P. vulgaris and modified flamboyant gum proteins showed an increase in antioxidant activity, compared to the hydrolyzate depending on the oxidation mechanism, as well as the pH conditions used and interaction between both component(AU)

Efectos adversos de las sustancias modelantes en Cali, Colombia / Adverse effects of modeling substances in Cali, Colombia

Resumen | Introducción. El deseo de mejorar la apariencia física mediante métodos sencillos y económicos, ha generado la aplicación indiscriminada de sustancias modelantes y, con ello, el surgimiento de la alogenosis iatrogénica, enfermedad cada vez más prevalente en Latinoamérica. Objetivo. Describir las características epidemiológicas y los efectos adversos de las sustancias modelantes en un grupo de pacientes de Cali, Colombia. Materiales y métodos. Se hizo una revisión retrospectiva de las historias clínicas de los pacientes que acudieron a consulta por complicaciones producidas por sustancias modelantes durante un sexenio. Resultados. Se incluyeron 1.322 pacientes, 95,5 % de ellos mujeres. Las edades oscilaron entre los 19 y los 83 años, con una media de 39 años. El sitio anatómico de infiltración con sustancias modelantes con mayor frecuencia de efectos adversos, fueron los glúteos. La asimetría y el aumento del volumen en el sitio infiltrado fueron los signos más comunes, en tanto que el dolor, las alteraciones del ánimo y la depresión o la ansiedad fueron los síntomas más percibidos. El 33,6 % de los pacientes desconocía la sustancia aplicada y el 28,1 % refirió haberse aplicado biopolímeros. La mayoría de estos procedimientos estuvo a cargo de personal sin la debida formación. Conclusiones. Estos pacientes requieren la atención de equipos multidisciplinarios para establecer alternativas de tratamiento que mejoren su calidad de vida. Además, se necesitan la regulación de los establecimientos, y las medidas de vigilancia, inspección y control en la importación y el uso de estas sustancias.

Abstract | Introduction: The desire to improve one's physical appearance through simple and economical methods has resulted in the indiscriminate application of modeling substances. As a result, iatrogenic allogenosis has emerged as an increasingly prevalent disease in Latin America. Objective: To describe the epidemiological characteristics and adverse effects arising from the use of modeling substances in a group of patients from Cali, Colombia. Materials and methods: We conducted a retrospective review of the medical records of patients who consulted for complications arising from the use of modeling substances during a six-year period. Results: A total of 1,322 patients were included of whom 95.5% were women. Patients' ages ranged from 19 to 83 years, with an average of 39 years. The most infiltrated anatomical site showing adverse effects due to modeling substances was the buttocks. The asymmetry and increased volume of the infiltrated site were the most common signs while pain, mood disturbances, and depression or anxiety were the most commonly perceived symptoms. A total of 41.8% of patients ignored what substances they had received, and 28.5% received biopolymers; these procedures were mostly performed by non-qualified personnel. Conclusions: The care of these patients requires multidisciplinary teams to establish treatment alternatives to improve their quality of life. In addition, the regulation of establishments, as well as the surveillance, inspection, and control of the imports and use of these substances should be warranted.

Respiration in Azotobacter vinelandii and its relationship with the synthesis of biopolymers

Azotobacter vinelandii is a gram-negative soil bacterium that produces two biopolymers of biotechnological interest, alginate and poly(3-hydroxybutyrate), and it has been widely studied because of its capability to fix nitrogen even in the presence of oxygen. This bacterium is characterized by its high respiration rates, which are almost 10-fold higher than those of Escherichia coli and are a disadvantage for fermentation processes. On the other hand, several works have demonstrated that adequate control of the oxygen supply in A. vinelandii cultivations determines the yields and physicochemical characteristics of alginate and poly(3-hydroxybutyrate). Here, we summarize a review of the characteristics of A. vinelandii related to its respiration systems, as well as some of the most important findings on the oxygen consumption rates as a function of the cultivation parameters and biopolymer production.

Improvement of polyhydroxybutyrate production by deletion of csrA in Escherichia coli

BACKGROUND: Poly-3-hydroxybutyrate (PHB) can be efficiently produced in recombinant Escherichia coli by the overexpression of an operon (NphaCAB) encoding PHB synthetase. Strain improvement is considered to be one of critical factors to lower the production cost of PHB in recombinant system. In this study, one of key regulators that affect the cell growth and PHB content was confirmed and analyzed. RESULT: S17-3, a mutant E. coli strain derived from S17-1, was found to be able to achieve high cell density when expressing NphaCAB with the plasmid pBhya-CAB. Whole genome sequencing of S17-3 revealed genetic alternations on the upstream regions of csrA, encoding a global regulator cross-talking between stress response, catabolite repression and other metabolic activities. Deletion of csrA or expression of mutant csrA resulted in improved cell density and PHB content. CONCLUSION: The impact of gene deletion of csrA was determined, dysfunction of the regulators improved the cell density of recombinant E. coli and PHB production, however, the detail mechanism needs to be further clarified.

Actividad antitumoral de biopolímeros aislados de Vibrio sp. en cáncer de mama inducido en ratas / Antitumor activity of vibrio sp. isolated biopolymers in induced breast cancer in rats

RESUMEN Objetivo: Evaluar la actividad antitumoral del extracto crudo de biopolímeros aislados de la bacteria marina Vibrio sp. en cáncer de mama inducido por N-Methyl-N-nitrosourea (MNU) en ratas. Materiales y métodos: Se cultivó la bacteria marina Vibrio sp. durante siete días, luego se filtró, precipitó y concentró el sobrenadante crudo. Se administró una dosis única de MNU 50 mg/kg a 39 ratas Holtzman y fueron tratadas diariamente durante nueve semanas por vía oral: G1 (n=13): suero fisiológico 0,1 mL/100g; G2 (n=13): extracto crudo de biopolímeros de Vibrio sp. 20 mg/kg; G3 (n=13): tamoxifeno 100 mg/kg. El G4 (n=11) solo recibió suero fisiológico 0,1 mL/100g. Se valoró semanalmente el peso corporal y la aparición de tumores mamarios identificados mediante palpación; así como el examen histopatológico al final del tratamiento. Resultados: El 77% de las ratas del grupo G1 desarrollaron tumores a partir de la séptima semana en un promedio de 2,2 tumores por cada animal; en contraste al grupo tratado con el extracto crudo de biopolímeros y tamoxifeno; donde solo una rata (8%) en cada grupo desarrolló tumores y posterior a la semana nueve de la inducción (p=0,001). Los resultados histopatológicos sostienen que todos los tumores extirpados corresponden a adenocarcinoma ductal de mama con distintos patrones: sólido, papilar y quístico. Asimismo, se evidenciaron focos necróticos en el 30% de los tumores del grupo G1. Conclusión: El extracto crudo de biopolímeros aislados de Vibrio sp. presentan efecto antitumoral en cáncer de mama inducido en ratas.

ABSTRACT Objective: To evaluate the antitumor activity of the raw extract from biopolymers isolated from the Vibrio sp. marine bacteria in breast cancer induced by N-Methyl-N-nitrosourea (MNU) in rats. Materials and methods: The Vibrio sp. marine bacteria was cultured for seven days, then the raw supernatant was filtered, precipitated and concentrated. MNU was administered in a single dose of 50 mg/kg to 39 Holtzman rats and were daily treated for 9 weeks orally: G1 (n = 13): 0.1 mL/100 g of saline solution; G2 (n = 13): 20 mg/kg of raw extract from Vibrio sp. biopolymers; G3 (n = 13): 100 mg/kg of tamoxifen; G4 (n = 11) received no MNU and only 0.1 mL/100 g of saline solution. Body weight and the appearance of breast tumors identified by palpation were assessed weekly, as well as histopathological examination at the end of treatment. Results: Seventy-seven percent of the rats in the G1 group developed tumors from week 7 onwards in an average of 2.2 tumors per animal; in contrast to the group treated with the raw biopolymer extract and tamoxifen; where only one rat (8%) in each group developed tumors after week nine of induction (p = 0.001). The histopathological results support that all the removed tumors correspond to breast ductal adenocarcinoma with different patterns: solid, papillary and cystic. Likewise, necrotic foci were evidenced in 30% of the tumors of the G1 group. Conclusion: The raw extract of biopolymers isolated from Vibrio sp. present antitumor effect in breast cancer induced in rats.

Diseño innovador para la obtención y caracterización de un bioplástico utilizando como materia base la fibra de la cáscara de coco y papaya / Innovative design for obtaining and characterizing a bioplastic using as a base material the fiber of the coconut shell and papaya fiber

Los plásticos se producen a partir del petróleo. Estos polímeros perduran en la naturaleza por largos períodos de tiempo y, por tanto, se acumulan, generando así grandes cantidades de residuos sólidos. El objetivo principal de esta investigación es producir, a escala de laboratorio, un bioplástico a partir de la fibra contenida en la cáscara de coco, que pueda servir de materia prima para la elaboración de productos biodegradables.

Plastics are produced from oil. These polymers persist in nature for long periods of time and, therefore, they are accumulated in large amounts of solid waste. The main objective of this research is to produce, on a laboratory scale, a bioplastic from the fiber contained in the coconut shell, which can serve as raw material for the production of biodegradable products.

Chronic venous ulcers: a review on treatment with fibrin sealant and prognostic advances using proteomic strategies

Venous ulcers are the main causes of chronic lower-limb ulcers. The healing difficulties encourage the research and development of new products in order to achieve better therapeutic results. Fibrin sealant is one of these alternatives. Besides being a validated scaffold and drug delivery system, it possesses excellent healing properties. This review covered the last 25 years of the literature and showed that the fibrin sealant is used in various clinical situations to promote the healing of different types of ulcers, especially chronic ones. These are mostly venous in origin and usually does not respond to conventional treatment. Commercially, only the homologous fibrin sealants obtained from human blood are available, which are highly efficient but very expensive. The heterologous fibrin sealant is a non-commercial experimental low-cost product and easily produced due to the abundance of raw material. The phase I/II clinical trial is already completed and showed that the product is safe and promisingly efficacious for the treatment of chronic venous ulcers. In addition, clinical proteomic strategies to assess disease prognosis have been increasingly used. By analyzing liquid samples from the wounds through proteomic strategies, it is possible to predict before treatment which ulcers will evolve favorably and which ones will be difficult to heal. This prognosis is only possible by evaluating the expression of isolated proteins in exudates and analysis using label-free strategies for shotgun. Multicentric clinical trials will be required to evaluate the efficacy of fibrin sealant to treat chronic ulcers, as well as to validate the proteomic strategies to assess prognosis.(AU)

Neuroprotection and immunomodulation by dimethyl fumarate and a heterologous fibrin biopolymer after ventral root avulsion and reimplantation

Ventral root avulsion (VRA) is an experimental approach in which there is an abrupt separation of the motor roots from the surface of the spinal cord. As a result, most of the axotomized motoneurons degenerate by the second week after injury, and the significant loss of synapses and increased glial reaction triggers a chronic inflammatory state. Pharmacological treatment associated with root reimplantation is thought to overcome the degenerative effects of VRA. Therefore, treatment with dimethyl fumarate (DMF), a drug with neuroprotective and immunomodulatory effects, in combination with a heterologous fibrin sealant/biopolymer (FS), a biological glue, may improve the regenerative response. Methods: Adult female Lewis rats were subjected to VRA of L4-L6 roots followed by reimplantation and daily treatment with DMF for four weeks. Survival times were evaluated 1, 4 or 12 weeks after surgery. Neuronal survival assessed by Nissl staining, glial reactivity (anti-GFAP for astrocytes and anti-Iba-1 for microglia) and synapse preservation (anti-VGLUT1 for glutamatergic inputs and anti-GAD65 for GABAergic inputs) evaluated by immunofluorescence, gene expression (pro- and anti-inflammatory molecules) and motor function recovery were measured. Results: Treatment with DMF at a dose of 15 mg/kg was found to be neuroprotective and immunomodulatory because it preserved motoneurons and synapses and decreased astrogliosis and microglial reactions, as well as downregulated the expression of pro-inflammatory gene transcripts. Conclusion: The pharmacological benefit was further enhanced when associated with root reimplantation with FS, in which animals recovered at least 50% of motor function, showing the efficacy of employing multiple regenerative approaches following spinal cord root injury.(AU)

Biopolymer Xanthan: A New Adjuvant for DNA Vaccines

Abstract DNA vaccines have been evaluated as an option to prevent several diseases. In this study, the capacity of the xanthan biopolymer to improve the DNA vaccines immune response, administered intramuscularly, was evaluated. The experimental vaccines consisted of genes encoding fragments of the proteins LigA and LigB of Leptospira interrogans serogroup Icterohaemorrhagiae serovar Copenhageni strain Fiocruz L1-130. The humoral immune response was evaluated by indirect ELISA. Cytokine expression levels were determined by RT-qPCR. Compared to the control group, the IgG antibody levels of animals immunized with pTARGET/ligAni and pTARGET/ligBrep plasmids associated with xanthan biopolymer were significantly higher than the control group. Additionally, there was a significant increase in IL-17 expression in animals vaccinated with pTARGET/ligBrep and xanthan.

Atividade antifúngica in vitro e in vivo de revestimento comestível ativo contra Colletotrichum sp / In vitro e in vivo antifungal activity of active edible coating against Colletotrichum sp

A atividade antifúngica in vitro e in vivo do carvacrol disperso no revestimentos comestíveis foi avaliada contra o Colletotrichum sp.. Na elaboração do revestimento foi utilizado amido de mandioca e gelatina. A concentração de carvacrol variou de 0-0,6 g.mL-1 de solução filmogênica. O revestimento ativo mostrou-se um ótimo antifúngico no controle da proliferação do Colletotrichum sp. com concentração inibitória mínima (CIM) para o carvacrol de 3,51 μg.mL-1. O revestimento de 0,3 mg carvacrol. g-1 solução inibiu a proliferação do Colletotrichum sp. nas análises antimicrobianas in vivo realizadas em morangos. Os revestimentos ativos foram capazes de inibir o aparecimento da doença fúngica antracnose em 80 a 90 % dos morangos com dois dias de incubação de Colletotrichum sp..

Preparation and Characterization of Nanocomposite Scaffolds (Collagen/β-TCP/SrO) for Bone Tissue Engineering

BACKGROUND: Nowadays, production of nanocomposite scaffolds based on natural biopolymer, bioceramic, and metal ions is a growing field of research due to the potential for bone tissue engineering applications. METHODS: In this study, a nanocomposite scaffold for bone tissue engineering was successfully prepared using collagen (COL), beta-tricalcium phosphate (β-TCP) and strontium oxide (SrO). A composition of β-TCP (4.9 g) was prepared by doping with SrO (0.05 g). Biocompatible porous nanocomposite scaffolds were prepared by freeze-drying in different formulations [COL, COL/β-TCP (1:2 w/w), and COL/β-TCP-Sr (1:2 w/w)] to be used as a provisional matrix or scaffold for bone tissue engineering. The nanoparticles were characterized by X-ray diffraction, Fourier transforms infrared spectroscopy and energy dispersive spectroscopy. Moreover, the prepared scaffolds were characterized by physicochemical properties, such as porosity, swelling ratio, biodegradation, mechanical properties, and biomineralization. RESULTS: All the scaffolds had a microporous structure with high porosity (~ 95–99%) and appropriate pore size (100–200 µm). COL/β-TCP-Sr scaffolds had the compressive modulus (213.44 ± 0.47 kPa) higher than that of COL/β-TCP (33.14 ± 1.77 kPa). In vitro cytocompatibility, cell attachment and alkaline phosphatase (ALP) activity studies performed using rat bone marrow mesenchymal stem cells. Addition of β-TCP-Sr to collagen scaffolds increased ALP activity by 1.33–1.79 and 2.92–4.57 folds after 7 and 14 days of culture, respectively. CONCLUSION: In summary, it was found that the incorporation of Sr into the collagen-β-TCP scaffolds has a great potential for bone tissue engineering applications.

Fibrin biopolymer as scaffold candidate to treat bone defects in rats

Bone tissue repair remains a challenge in tissue engineering. Currently, new materials are being applied and often integrated with live cells and biological scaffolds. The fibrin biopolymer (FBP) proposed in this study has hemostatic, sealant, adhesive, scaffolding and drug-delivery properties. The regenerative potential of an association of FBP, biphasic calcium phosphate (BCP) and mesenchymal stem cells (MSCs) was evaluated in defects of rat femurs. Methods: Adult male Wistar rats were submitted to a 5-mm defect in the femur. This was filled with the following materials and/or associations: BPC; FBP and BCP; FBP and MSCs; and BCP, FBP and MSCs. Bone defect without filling was defined as the control group. Thirty and sixty days after the procedure, animals were euthanatized and subjected to computed tomography, scanning electron microscopy and qualitative and quantitative histological analysis. Results: It was shown that FBP is a suitable scaffold for bone defects due to the formation of a stable clot that facilitates the handling and optimizes the surgical procedures, allowing also cell adhesion and proliferation. The association between the materials was biocompatible. Progressive deposition of bone matrix was higher in the group treated with FBP and MSCs. Differentiation of mesenchymal stem cells into osteogenic lineage was not necessary to stimulate bone formation. Conclusions: FBP proved to be an excellent scaffold candidate for bone repair therapies due to application ease and biocompatibility with synthetic calcium-based materials. The satisfactory results obtained by the association of FBP with MSCs may provide a more effective and less costly new approach for bone tissue engineering.(AU)